How to fix the error?
Don’t worry that you bricked the phone just take a deep breath and relax a little bit, I am not gonna leave from here without fixing the error!
THE PROBLEM YOU FACED!!
You might be flashing a firmware or a wrong ROM on your device using SP tool and the moment after you formatted the whole device including the bootloader lead to a HARD BRICKED phone in your hands, with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) ”
this critical issue happens when the space in the device storage get wiped(EMMC storage).
see how you gonna fix your phone yourself without going to the service provider in a few simple steps!!!!1. MAKE SURE YOU HAVE A STOCK ORIGINAL ROM OF YOUR DEVICE & PROPER DRIVERS INSTALLED ON YOUR PC.
2. OPEN SP TOOLS.
3. BROWSE THE SCATTER FILES OF YOUR ROM AND CLICK DOWNLOAD.
4. IMMEDIATELY PRESS THE VOLUME DOWN BUTTON THEN AFTER THAT CONNECT YOUR DEVICE TO THE PC WHEN SEARCHING APPEARS ON THE SP TOOL (if not worked then do the same process but this time you press both the POWER AND VOLUME DOWN button)
5. THEN FLASH YOUR STOCK ROM GREEN CIRCLE APPEARS AND YOU ARE DONE WITH IT!!
SEE HOW SIMPLE!!!!
* Use the latest version of the Sp tool to flash your stock Rom! If the green completion circle appears and still the device doesn’t boots up then use the Sp tool version number 5.1424 to flash the device.
Note: After lots of fixing I’ve found out that all the devices have different ways to get flashed properly, for those who didn’t fixed their phone by the following above method including the steps mentioned under the comments, please leave the details of your phone either in the comment section or in the support form I will definitely look for the solution Asap. Plus those who are having lenovo, their work is in progress for the fix. Also if you guys are finding trouble reading the comments section on your mobile, then you can change the view from portrait to landscape for better reading (enable auto rotation).
Also feel free to contact us via our TechulK Support Form.
I am vimal and I am having this error with my Gionee x1(mtk6737).
I have checked and verified the file, I have downloaded for my device from here , it is okay
and it is being detected by computer, I also tried the button combination you suggested in this post with and without battery but nothing happened It still shows the same error
Hi Vimal, did you try using a different version of the SP flash tool? Or are you using the latest SP flash tool to flash? If it’s getting detected by the system then it’s a good sign!
I am following your blog for a very long time, always loved your content. Thanks for sharing this. Btw I have just used Sp tool, hope this works.
got stucked on S_FT_ENABLE_DRAM_FAIL(4032)
i already have 3 roms 2 dram fail and 1 mismatched chipset
my phone was still detected by pc,, what do you think is the problem?
Kindly send your device information on firstname.lastname@example.org .
It’s not working dear. My phone is Symphony p6
Hey, Mate. Did you fix the problem? Mail me at email@example.com the device details (which country/make etc). I will have a look!! Thanks
Hello,i have Lenovo A328, and after return from service because is not power on, i tried to repair myself. And the phone its detected by computer like MTK USB PORT ( 41 ), sp flash load a red bar and finally i get :
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
I tried everything, i download all the rom , i have tried all the combination of the button possible with or without batery.
I havve tried to copy another scatter file from another rom that i have used to repair allview p5 life phone and i get
BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054).
Thanks for any.
Hi Florin, I hope you are safe in this Covid-19 situation.
If the device is getting detected by the PC then it is really a good sign. There could be a lot of reasons behind you are not able to flash your Stock ROM. Did you try flashing with the latest version of the SPFT?
My Q Mobile Noir E2 dead after flash. Now he show dram failed plz help
hi i have an infinix hot 4 lite i got the stockrom from https://androidmtk.com/download-infinix-stock-rom it says x557 stock firmware.. after i clicked download on sp tool process completed with a green button but the phone totally went mute… no lights, no vibration and battery was above 60 percent b4 the process
Hi- i have an evertek evervivid q50 mt6582 phone, i flashed it with this rom: Samsung S7 SM-G935F MT6580 (the s7 firmware size 3gb + and the original rom size was 650mb). It’s Hard bricked now, unable to re-flash because unable to get it discovered by pc while pressing the up and down buttons, tried many times with no luck. Is there a solution or tool to fix this problem. Plz Help – Thx in advance
Wondefully written. I had same problem with a Tecno Y2 which was bricked after flashing the wrong firmware build. SP Flash tool was giving the DRAM error and no other flash tool could even read the boot infos. But after downloading the correct rom variant and folling this guide, it worked like a charm.
Thank you for your valuable feedback. 🙂
Flashed my Tecno Y2 MT6572 with TWRP recovery and worked really cool. Tried flashing custom ROM but failed after formating via recover and was in bootloop so decided to flash back custom ROM…mt65xx vcom drivers installed,tried your steps but still get DRAM ERROR…PLz heeeelp