Sp Tool DRAM Error Finally Fixed

606

How to fix the error?

tecHulk

Don’t worry that you bricked the phone just take a deep breath and relax a little bit, I am not gonna leave from here without fixing the error!

THE PROBLEM YOU FACED!!

You might be flashing a firmware or a wrong ROM on your device using SP tool and the moment after you formatted the whole device including the bootloader lead to a HARD BRICKED phone in your hands, with no sign of charging LED light or anything. After that when you tried to flash your stock ROM back on the device using SP TOOLS then you get the error written:
“BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) ”
this critical issue happens when the space in the device storage get wiped(EMMC storage).

 

see how you gonna fix your phone yourself without going to the service provider in a few simple steps!!!!1. MAKE SURE YOU HAVE A STOCK ORIGINAL ROM OF YOUR DEVICE & PROPER DRIVERS INSTALLED ON YOUR PC.

2. OPEN SP TOOLS.

3. BROWSE THE SCATTER FILES OF YOUR ROM AND CLICK DOWNLOAD.

4. IMMEDIATELY PRESS THE VOLUME DOWN BUTTON THEN AFTER THAT CONNECT YOUR DEVICE TO THE PC WHEN SEARCHING APPEARS ON THE SP TOOL (if not worked then do the same process but this time you press both the POWER AND VOLUME DOWN button)

5. THEN FLASH YOUR STOCK ROM GREEN CIRCLE APPEARS AND YOU ARE DONE WITH IT!!

SEE HOW SIMPLE!!!!

TIP:
* Use the latest version of the Sp tool to flash your stock Rom! If the green completion circle appears and still the device doesn’t boots up then use the Sp tool version number 5.1424 to flash the device.

Note: After lots of fixing I’ve found out that all the devices have different ways to get flashed properly, for those who didn’t fixed their phone by the following above method including the steps mentioned under the comments, please leave the details of your phone either in the comment section or in the support form I will definitely look for the solution Asap. Plus those who are having lenovo, their work is in progress for the fix. Also if you guys are finding trouble reading the comments section on your mobile, then you can change the view from portrait to landscape for better reading (enable auto rotation).


Also feel free to contact us via our TechulK Support Form.

SHARE
Next articleHow To Crack Poweramp

A Tech Geek who loves to write about Blogging, How-To’s and topics around Android platform. He founded techulk with a sole purpose for providing visitors the exact information they need with simple and step by step working explanations.

606 COMMENTS

  1. Hello my friend
    I have a Huawei G610-u00 which turned itself off when flashing with a 4032 error.
    Please help me ….
    Thank you

  2. Hello Sir/Ma’am,
    I have Qmobile LT700 (MT6735)
    any ideas how to flash it. The regular way does not work on it.

  3. HI,
    My phone is chinese I phone 7 clone, it doesnt boot (screen is blank) or else it responds but screen doesnt work (like home button vibrates even screen when touched it vibrates but screen doesnt start).
    Flashing was successful with green circle showing sucessful at the end still it doesnt start , please help.

    regards,

  4. My cellular phone is a huawei y520 u03, the flashe why only the logo appeared
    But now you no longer on the and attempted several times with several flash tool.
    And I have another problem that a message of error gives me to:
    error nand flash was not detected mtk6572

    Options when the rom in the flash has tool you do not have the file’s address and they are the usrdata and the uboot they appear in you empty, es hope that you can help me with this problem. Thanks.

  5. Hi.
    I have an alcatel pop c7 7041x. And I tried flash stock firmware, kitkat firmware and also the backup one made with mtk tools and when i plug the phone to the pc always shows same error dram……. And doesn’t do a thing. Any suggestions?

  6. I have flashed the wrong firmware on my micromax e313, aftr that i got N numbers of lines on my display.. Its bricked.. Then i have changed the motherboard of same model but dif ver of firmware installed.. Bad luck i m getting same dead dispaly with numerous lines on it.. Can u help me?
    Thanks in advance..

  7. i flashed samsung galaxy tab 5 clone mtk 6572, ty0712b-3g-hd-2-kk-v3.8.1.151225 kitkat rom i downloaded it from 4shared downloads it flashed and showed the green pass ok but after powering it on it showed no sign of life. only can be recognised in the device manager mtk usb port com6 as connected so if this was not an orignal rom where can i find the original rom pliz help

  8. my infinix x510, hot 2 refuses to boot into recovery,dosent charge and dosent turn on.whenever I try flashing a Rom using so flash tool I always get an error message

  9. Thank God
    I finally fixed my device by using the latest SP Tool and correct FRIMWARE
    Methods:
    1.Click on download button in SP Tool
    2.Connect phone to usb cable by holding volume down button and the flashing process will start then release volume button.
    Hope This Help

  10. Hello. I accidentally flashed Huawei g610-t11 (mtk6582) with Huawei g610-u20(mtk6589) rom, now my phone stuck in bootloop and I can’t flash with the right rom (mtk6582) .please help?

    • Well, you flashed the wrong preloader onto your device. You will need to first flash the correct preloader for your device. After you flash the correct preloader, you can flash all of the correct firmware to your device.

  11. Hello. I accidentally flashed Huawei g610-t11 (mtk6582) with Huawei g610-u20(mtk6589) rom, now my phone stuck in bootloop and I can’t flash with right rom (mtk6582) .please help?

  12. Hi,

    I have Micromax A114 phone. I upgraded software as previously having problem in phone-phone was stuck on its logo only. After hard boot or applied with all option of restarting or factory resetting, unable to on phone. Only logo was appearing so went to shop and shopkeeper upgraded it and phone worked for 1 week then again logo appears only. And now even nothing appears in phone, unable to charge or nothing is there in screen. So trying with SP tool, sometime red bar display with 100% downloading and purple bar appears with 100% downloading but nothing more than that. Still unable to On phone or do anything through SP tool – (SPtool version-SP_Flash_Tool_v5.1352.01) and used Micromax_A114_V1_221013_(by_xdafirmware.com) – Micromax_A114_V3_240714_(by_xdafirmware.com), used both scatter files but nothing happen. Please advise what to do and how to live my phone again.

  13. Sir,
    I have flashed different sp tool version withrom for micromax unite 3 hw ver 1.0 sw ver 14.0 but its not turning on help needed plz!

  14. Mmx Q372 Hw ver 1.0 Sw ver 14.0 24032015
    First stuck at boot logo
    Tried recovery, no use, then tried sp flash same problem boot logo stuck.
    Next tried flash with different rom ver 3 firmware upgrade selected after flash phone dead…no boot no charge….its gone! But still without battery it is detected to pc and sp tool so tried to flash again bt no luck..plz help!

  15. I accidentally bricked my micromax a102 . Could you please help me . I am going crazy here trying everything i know.

  16. Sir,I have Micromax a350 and maybe it is bricked because it’s my pc making connection sound when connecting my phone ,I also flashed it with SP tools but it stuck on 100% of red bar and showing error of storage mismatch I.e., target storage is band and scatter storage is emmc .
    So please help in resolving this problem
    And give me the original stock ROM link too if required

  17. I have lenovo k3 note,
    firstly I tried to unbrick it from soft brick, but, I accidently formatted it, now it got hard brick,
    I am getting error
    brom: obtain dram failed (5054),
    tried all patterns,
    please helpppppp
    sorry for my bad engish,
    thanks in advance.

  18. I have a xolo a600 handset and i think i accidentally flashed wrong preloader.
    Now it nor booting nor charging, no response.
    When i flash through sp flash tool, there is a red progress bar and then dram error shows up.
    Please help.

  19. My Phone is lenovo A319 [rocstar] and it was bricked, when i flash it using sp tool it shows –Brom Error: S_FT_Enable_DARM_Fail (4032). plz help me.plz

  20. Hi,
    as posted previously, my acer liquid gallant duo is bricked.
    I followed the procedure you suggested above but still no results..
    the error is still the same:
    Storage type missmatch!
    scatter storage type is HW_ STORAGE_EMMC
    target storage type is HWSTORAGE_NONE

    anything else i can try?
    thanks carlo

  21. I have a hard bricked gionee M2 8gb rom, anytime I try using sp flash tool to flash a new rom it fails and now my pc can’t even detect the phone at all. Please help [email protected] that’s my e-mail 08145178183 that’s my whatsapp number

  22. Good evening admin, please I flash tecno H7 with sp flash tools but after d purple bar and follow by the yellow bar, d phone stuck at 62% with error (3149). Pls help

  23. Good evening admin…pls am flashing tecno H7 but after d purple bar, d file stuck at 62% on the yellow bar and an error (3149) occur. Please help

  24. I have 2 phone:

    One is Cherry Mobile XL [I have a backup from SPFT ROM_0 then was processed thru MTK DroidTools but there was no preloader.bin created, I have the original Scatter File for it and the ROM_0 that was produced by SPFT]. CM Flare XL has been flashed with i a rom that I downloaded online claiming it to be the Official ROM for my Phone, and now its producing error 4032 and sometimes 5054, it won’t boot / light up / nor charge but if plugged to my PC it is being detected.

    The same issue is with my Alcatel Flash 2, it was flashed with a wrong preloader and is producing the same errors as the CM Flare XL.

    I just want to know if there’s hope for both phones or should i just quit and buy a new one…

    I hope you can help… thanks!

  25. hi,
    my acer liquid gallant duo is bricked
    I tried different times with different sp flash tool version but i always get the same response..
    When i start the flash procedure i get a 100% red download bar and then it stops on a window saying:
    Storage type missmatch!
    scatter storage type is HW_ STORAGE_EMMC
    target storage type is HWSTORAGE_NONE
    anything i can try before i send it to the repair shop ?

    thanks
    Carlo

  26. My phone oppo joy 3 a11w,, now hard brick no vibrate,,i try to flash many firmware but still getting error 4032,,can u give the original room and how tow to fix this problem??

  27. my phone intex aqua 3g mini is dead(unbricked).after flashing show red light download da 100% in sp flash tool.
    plz send solution me.

  28. hi sandy here.
    i tried to flash stock rom for micromax a116i but always get ENABLE DRAM ERROR.
    tried all the combis possible but luck any suggestion would b welcome

  29. Hi, I have downloaded the firmware through sp flash tool. It was ok but when i did memory test it says nand flash was not detected. my fone is stuck on logo screen. how can i fix it. Please help. my phone model is oppo r831k

  30. thank God for people like you,
    please i have BROM ERROR:S_FT_DRAM_FAIL (0xFC0). i have tried everything, everytime i flash it, this error pop up and the phone is totally dead now, no life atall but detected by my pc
    i about to loose hope bro.

    phone model is MT6572 samsumg GT-I9060
    please helppppppp!!!!!

  31. My own case is weird! I got the new Tecno Droipad8D and used LUCKY PATCHER to PATCH TO ANDROID. The phone rebooted and then won’t complete the booting process till *forever*. It keeps rebooting and rebooting and still can’t complete the process. I went into recovery mode and restored to factory settings, I rebooted but the problem still lives on. I tried factory reset many more time but it didn’t solve the unlimited & reoccurring booting, So I quickly downloaded the STOCK ROM, got SP FLASH TOOL, VCOM_DRIVERS. Loaded the scatter and clicked download, but when I plug my tab (switched_off) , the computer makes a sound indicating that my tab was recognised (meaning the Android Drivers works perfectly )yet, nothing happens. It stays just as if nothing has been connected till I unplug the cable after waiting for like 1year*:( then it gives an error2005. I’m just fed up. Please reply or flash this number 08035290125, I’ll call back. Or better still email me please. Thanks.

  32. my phone is micromax a104

    i have updates sptool
    and a my phone also detected in sptool

    but when i connects my phone using vol, up button then A red line start and before starting that yellow line a pop message appears

    BROM ERROR : DRAM FAILED

    What to do now ?

  33. hello i have a micromax a106. while trying to flash it with sp tool it was dead after that i got to know that it was a copy phone of micromax a106 mt6572 while original a106 have mt6582. thus i need a flash file for micromax a106 (copy)mt6572.

  34. Sir
    This is GAUTAM. My micromax A116 having problems while flashing ROM. earlier I have flashed many times with the same ROM and SP tool. but this time 5069 Error is appeared. Many time I did it but PMT storage is not being sorted out.

  35. when i tried to remove the battery and the usb cable than i click on download in sp flashtool software right after clicking i put the battery and than i plug the usb cable the error stopped appearing.. hope it help…

  36. I flashed AQ4501 with sp flash tool by download, reboot frequently. them flashed by format+flash, it showed OK at the end but phone refused to boot nor charge, no sign of life. Please help.

    • i tried all but didn’t help so just downloaded official firmware from firmwarefile. com .. or phones official site .. now it’s fixed

  37. please i need help with flashing innjoo fire with spft, i have tried so many times but it keeps on showing error4032 dram failed i have used different pc, different spft versions and even by pressing power button+ vol down same thing pease help…

  38. I have a lenovo a369i its stock rom always gets hangups so i tried flashing the same stock rom with sp flash tool then i ended up in hard bricking not charging completely dead but when i try connecting usb to pc it gives a device connected sound but after 5-10 seconds it gets disconnected and again it keeps reconnecting the same procedure . I tried flashing the same rom with the same sp flash tool it gives dram error. What can i do to bring it back to life please suggest.

  39. I am having Micromax A116. Suddenly it was stuck in boot logo.I tried to boot via recovery mode but no luck so i tried to flash it via SP tool but now it totally dead not booting,no charging.

    Last year I have upgraded it from 4.1 to 4.2. I have used the same ROM to flash it but getting error as

    BROM ERROR S DL PMT ERR NO SPACE 5069

    I have tried different version of SP tool and 2-3 different ROM but still getting the same error.

    I have formatted the flash and tried it again but no luck.

  40. Help with oplous xonphone 5.After red bar completes error says time out + when again hit download button says cant open port.

  41. Hi, i have lenovo a606 i tried updating using sp flash tool v5.1436.0, after pressing download I get an error “BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) ” now my phone is bricked

  42. hello sir i have micromax A106 and i hard bricked it bcz of flashing wrong recovery.Now only logo shows and after it reboots. Now tell me how to flash it or what to do if it gave any error on sp flash tools.

  43. Hello sir my phone is in hard brick. I flash rom in s flash tool I got the same issue, dram failed error 4032. Load not match. I try to write in miracle box . I format allandroid then write. Write done . Then my wasnt open :/ try your combos nothing happen. 4032 error. My phone is mtk6572 S6 nand. I hope you will help me. Sorry for my english.

  44. sir i m having grand 2 clone and the problem is same DRAM fail problem and this problem caused when i formated the flash and i pressed vol down +pwr key to solve this problem but it couldnt be solved by me and i want anybody to help me please..

  45. sir i am having grand 2 clone with same DRAM failed problem because i have formated flash except bootloader and it shows nothing and i have tried the vol down and pwr key still occuring same problem please help me…..

  46. I have read, and re-read all tutorials and comments from this page, and sources from XDA and other forums. This so far seemed to be promising, however, your post stated that there is an issue with Lenovo Phones. I have a Lenovo A369i, infected with Monkey Test and Time Test virus. I have two options to remove them, first is root then install an uninstaller and second is to flash stock rom (since Hard/Factory Reset won't do the job). I am unable to root the phone since the virus keeps on popping up, so I decided to flash it with stock rom. I have researched the phone and several blogs linked me to one source, XDA. I have downloaded it, opened SPFT, saw the green rings and now it is bricked. I have tried using your methods, but unfortunately, none of them worked. Tried switching PCs, reinstalling several drivers from forums, and from Lenovo itself. I have used diff cables, all of which to no avail. I have concluded then that it might be an issue with Lenovo Phones, which is why this tut doesn't work for them. I am thankful that I have found this, but the phone is still bricked. 🙁 I guess this is goodbye Lenovo. 🙂

    • Hey Don't loose hope, I am here for you!! Just mail me your device details at [email protected]. I will do my best for providing a fix for your device!! Sometimes things don't work only because of anger and other stuffs! But we can give a last clean nice try, my friend!!
      Thanks,
      waiting for your mail!!!

    • Hi Shravan, thank you for responding to my comment. I have sent an email with Subject: Lenovo a369i Stock ROM Issue. I will wait for your response once you are available. A detailed description of what I experienced is in the email. If you have further clarifications, you can email me thru [email protected] Thanks. 🙂

  47. Good day sir, it is nice to see your answers and my hope is alive after I googled a few pages. But unfortunately not able to correct. your help is highly appreciable.
    Micromax A102 Doodle 1 Gb RAM + 4GB ROM
    after facing some issues with malware, i tried to factory restore the phone. it was ok and working. but suddenly virus appeared again. I tried 5 times to reset the phone to factory settings but in vein every time this virus installed more Applications. So i assumed i will have to reload from stock rom. I downloaded from https://drive.google.com/uc?id=0B2R8hbN7EN4xM2o2aU1mUHdTa1E this rom and sp tool. tried installing the rom but was unaware about exact procedure and ultimately found that phone is not getting started. although as per instructions it gets detected to device manager under ports (com19). what exactly shall i do ? Thanks for your valuable efforts. I am now getting S_F_T 4032 error.

  48. Please I need help with my Infinix zero x506 phone, it was working normally before but I wanted to upgrade it to lollipop so I have to lollipop rom already, and then flashed it with sp flash tool, it showed OK at the end but phone refused to boot nor charge, no sign of life. Please help.

  49. Please I need help with my Infinix zero x506 phone, it was working normally before but I wanted to upgrade it to lollipop so I have to lollipop rom already, and then flashed it with sp flash tool, it showed OK at the end but phone refused to boot nor charge, no sign of life. Please help.

  50. as simple u it is showing over here..but not working that simply..tried thousand times doing lk that with my micromax a 106 unite phone 8 gb ver..but no go..mailed u also but no speciefic help i got…so now..any solution or i should throw it to the nearby garbage…

  51. hi ..i successfully flash stock rom on my cherry mobile fuze v2 on spft but device wont boot..i got error on memory test flash nand not detected…any advice to fix this issue..phone not rooted btw before its dead

  52. hi..i have successfully flash stock rom on spft but the device wont boot..mtk6582 cherry mobile fuze v2..i have error nand flash mot detected on spft memry test…any advice..tyia

  53. My fone model is alcatel ot idol mini 6012d. I've downloaded all the stock roms I could get.but still getting the same error dram enable fail. At this point can I say my phone is hard bricked completely? Or there still something to do

  54. hi i have the same problem boot mi procesor is new one 64 bits mt6735 on bmobile
    ax 1020 and i guess sp flash tool is not compatible whit mi divice i bricked mi whith spmultiport flash download project or SPMDT

  55. my phone model is micromax a 106 unite 2..i have tried doing this method multiple times with stock rom available in different website like xdadevelopers etc.
    but issue is still same,,still i am getting same error,,which is dram failed,4032.

    kindly help me out on this if u can..in a very bad mess.

  56. Sir my device samsung gt-s7582 mt6572 looking dead,
    I Tried with your steps.
    It still shows same error, ENABLE DRAM FAIL (4032)
    Mistakenly I flashed wrong firmware, now only it is totally dead. because it does not respond, no on, no format, no update, but one thing I noticed it responds when I connect it with USB cable to pc It shows only Mediatk usb VCOM (ANDROID) driver. not MTxx preloader, NOT Mtk USB Port…. I Manually updated driver preloader VCOM because I am operating window 8. help me plz is there any solution, I did not make my backup ROM, now what should I do? I am totally helpless.

  57. Sir my cell gt-s7582 is like dead, and I don't have stock rom, because by mistake I downloaded wrong firmware, now nothing happens, not charging, not formating, not recovery, as I have tried different firmware after that, but sp flash tool shows Enable DRAM fail 4032, Sir main thing is that I dont have stock rom, now what should I do? any solution?

  58. my lenovo A850 is bricked when i flashed it. Now it cannot turn on when i put battery in. but when i connect to the computer not detected by pc. when i press power+volume up for 30 second my pc detect it as MKT USB PORT (COM3) for few second. i downloaded new ROM and try to reflashed it and got error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032).
    how to fix it..

  59. Hello there! I've flashed wrong Stock ROM on my lenovo A850. Now it cannot turn on and not detected by the computer. But when i press power+volume up, the device manager detect it as MKT USB PORT (COM3) for short-time. when i try to reflash it with new ROM provided by http://mobilenetworkcomparison.org.uk/tutorials/how-to-restore-the-lenovo-a850s-stock-rom/. It shows the BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)- power+volume up. what to do please help me..

  60. hi my phone model is lenovo a369i, phone is dead when i was flashed stock rom i get this BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) i have tried ( volume down & up combinations also power button pressing ……. any help?

  61. hi my phone model is lenovo a369i, phone is dead when i was flashed stock rom i get this BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) i have tried ( volume down & up combinations also power button pressing ……. any help?

    Reply

    • Did the device booted up when you flashed your stock ROM? If yes then,
      let your device battery to drain out completely and after that leave it charging for the whole night (6-8 hrs), if its still not booting up then your battery might be damaged!!

      Thanks

  62. Hello sir…
    I tried flashing my MICROMAX a114.It is in dead condition but i have charged the battery using another mobile so the battery is always full and whenever i try to connect the device it is connecting to my PC as i verified in device manager…
    I used several versions of sp flash tool and ROM…
    When i connect my phone after clicking on download it starts download DA 100% and then it stops there and shows message DRAM FAILURE 4032 Error…
    I tried clicking volume + and – button and tried even without battery but nothing happens …
    Plz Help me with this issue sir….

  63. Hello sir…
    I tried flashing my MICROMAX a114.It is in dead condition but i have charged the battery using another mobile so the battery is always full and whenever i try to connect the device it is connecting to my PC as i verified in device manager…
    I used several versions of sp flash tool and ROM…
    When i connect my phone after clicking on download it starts download DA 100% and then it stops there and shows message DRAM FAILURE 4032 Error…
    I tried clicking volume + and – button and tried even without battery but nothing happens …
    Plz Help me with this issue sir….

  64. sorryabout my english…
    i do all solutions
    i read all communet
    but the same problem
    error 4032
    i have lenovo a536
    i download offiseal rom from need rom
    A536_S147_140910_ROW
    in device manager it MTK USB PORT
    pleassssssssssse need help

  65. My phone Xolo A500S IPS is completely brick when i flash the official rom with SP Flash Tools. but the SP Flash Tools was old version.
    i successfully flash the official rom on my device. but after flash my device not on when i try to on it with on/off button and not show any charging logo.
    when i reconnect it to my laptop it shows nothing on device manager only beep laptop when i connect it. i try to again install drivers but nothing show. plz help me sir immediately..

Leave a Reply to amegh appu Cancel reply

Please enter your comment!
Please enter your name here